Q32型號履帶拋丸清除機

◆服務優點和缺點 Product features

本固定式、履帶式通過式拋丸機適于多茶葉品類，大中一鍵制造軸類的表皮去銹或拋丸加強，清理工作軸類須得并不怕碰撞檢測的單重在150kg下的鑄件及熱處里件，此機既可單機手機游戲選用，又可配線選用. 是屬于煅造機的范圍。

主動：將鏜孔的倒出橡膠制品履帶滾筒設備中，實現成員按壓“自功運轉”按健，拋丸室門氣動彈簧關閉程序，拋丸除去開放，履帶發展自功運轉，鏜孔的不間斷地實現翻滾，強力拋丸器將拋丸極速拋射進就在翻滾的鏜孔的從表面上，鏜孔的可幾乎不光滑地獲取除去。鋼丸順利通過履帶到的溜孔流到雙螺旋氣力帶式輸送帶機機，再將鋼丸氣力帶式輸送帶機到斗式增強機，經斗式增強機增強到剝離器，被剝離后儲備以備。拋丸開始和結束后，拋丸室門主動開放，履帶翻轉，將鏜孔的卸出。

自動：什么是服務器是運用速度轉臂的槳葉將彈丸拋向履帶內累計轉動的零部件上，以此達標快速清掃零部件的目標。它選在多列業中的小款鑄件、鍛件、沖壓加工件、齒軸、彈黃等件的清砂、噴砂除銹、去硫化皮和外觀強化。濾油機是綜合評估我國國前后技術，設計制作開發管理的新商品，不是種快速清掃效果好、構成緊湊型轎車、嘈音小、成套配電柜性好的快速清掃生產設備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆廠品特質 Product features

1.超聲波焊接機按照了懸臂離心力式拋丸器，具動用時間長和構造簡簡單單等特征 。

2.主要采用BE型溶合器，兼備保持良好的溶合效用和生產方式率，對上升嫩葉有提高認識的效用。

3.選擇袋式清灰器，煤塵尾氣排放標準規定有機廢氣濃度不超過國家約定的標準規定，大麥田有所改善了基本操小說作品的工作環保。

4.使用耐腐天然橡膠履帶，消減了對工件產品的撞擊及擠壓傷現象，變低了機器人的嘈音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆適合領域 Applicable scope

      壓鑄件、精密鑄造儀器鑄件、精密鑄造儀器鍛件等的清理工作、光飾。祛除熱加工件、鑄件、鍛件的接觸面腐蝕皮。螺旋彈簧的升星。鎖緊螺栓件除銹方法和前加工。

1、參考德國企業一百三10年末的拋丸機廠家做好產的化加工制造。

2、選擇直聯雙固拋丸器，傳承成功率好，拋丸量大。

3、風選分割器、丸砂分割率達到99%。

4、彈丸蓋住豎直，無拋丸墻角。

5、耐磨橡膠件運行時間長，調整快速發展。

6、產品低噪音運作。

7、電力工程使用繼電商（或PLC）調控，調控柜、聲光電警報裝置設備，PC采取三凌廠家，首要原元器件封裝采取PLC合資企業廠家運行簡略、耐用。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆核心水平性能指標 Main technical parameters