噴砂裝備款型

STR-NKP-1型管道鋪設壁上噴涂料器  Spraying machine for piping inner wall

◆可用于區域 Applicable scope

常中用孔洞及中形地埋管的罐壁外表面處理，它是控制無氣噴漆機推送來的油田粉末粉末涂料，控制專用的霧炮，使粉末粉末涂料霧化吸入后間接養成嗽叭形（園扇形、塊實心），不均地噴在地埋管內外表面，可以控制地埋管的外表面處理。 NKP-1型主要符合于Ф50-Ф300mm的水管，粉末涂料凝固點應當大于80秒（4號福特杯）。倘若乳膠漆消費黏性過于80秒，需要加萃取劑調制。NKP-1型基本性上不會遭受途徑粗度限定，但最后不立于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

按裝方框圖 Installation to which