冷藏式熱空氣干躁機
◆設備特征 Product features
冷庫安裝小編及空氣質量軟件系統,經專業最準來計算,結構設計產品參數均留20%之上的余下量。縮小機劑再縮小機機按照補償器式或渦流式、缸筒式外移式式管理縮小機劑再縮小機機及半外移式管理螺絲桿式縮小機劑再縮小機機(20HP以下),程序運行穩固,的噪音低,穩定性準確,低耗電生存期長。熱效率比好,或許防護等級為IP54(防灰及防濺)
熱調換器、風氣液分離器器選取優越T2紫銅管帶純鋁鰭片,攏流的結構的傳熱產出率好、所以比熱容小,的結構的緊湊型suv。筒節板材選取不銹鋼板或高碳鋼熱浸鋅,可防止對文件壓縮的空氣的三次的污染。制冷機管控元器件特點表性美麗。兼備熱電廠回縮閥的節流減壓特點表性,水蒸汽旁通閥的動能的調節特點表性,過交流電、過負債、冷煤高壓力保護的等特點表性。
液固剝離 器按照漩風剝離 與不銹綱絲網捕霧設計融入,擁有液固剝離 目的撤底,預防的水分的再次化掉,保證 冷干機的空氣干燥目的。它比漩風剝離 器特點好,同時又比過濾裝置式液固剝離 器適用成體低,擁有特點市場價比。水空調蒸發器器為創新型低翅熱管,慢流水、多沖程,熱交換利用率好,長久的適用不可積垢。智能排水管道器按需設置成,除水加發展節能環保,目的好;浮球式,光電子時控可選裝擇。外定子冷電扇,大風天氣量、低的噪音,平繁開關長耐用度。
耐壓零件機械設備架構制作合情合理,以便于維系定檢;表皮熱噴塑,樣貌整潔,不掉漆;無基礎上使用,運轉趨于穩定無振動模式,修補率低,無耗費品,運轉費少,重復運轉不需要值班人員等待。
Refrigeration and air system, the experts accurate calculation, design parameters are left more than 20% of the surplus. Refrigeration compressors adopt international advanced rotary or scroll type, piston enclosed refrigeration compressor and close partly screw refrigeration compressor (20 HP above), stable operation, low noise, reliable performance, save electricity long life. Can effect comparing high, protection grade for IP54 (dust and splash)
Heat exchanger, wind condenser copper pipe with high quality with pure aluminum fins on heat flow structure, high yield, and thus, small size, structure compact. The cylinder body materials selecting stainless steel or carbon steel galvanized, can avoid to compressed air of the secondary pollution. Refrigeration control elements adopt the most advanced Denmark danfoss (DANROSS) and the Persian LAN (SPORLAN), (ALCO) refrigeration components, excellent performance. Thermal expansion valve with the throttling step-down function, heat the by-pass energy adjustment function, over electric current, the load, cold media high voltage protection.
Liquid-vapor separator using whirlwind separation and stainless steel wire the organic combination of the trap with gas liquid separation effect of moisture, avoid completely secondary evaporation, ensure the blotting etc.is dry effect. It than cyclone separator performance is good, at the same time than a gas-liquid separator filter brand-newly type use adult, and has a low price is high performance. Water condenser copper pipe for high quality, low wing, stroke, slow flow in high thermal efficiency, use for a long time shoulds not be scaled. Automatic drainage device according to the needs, in addition to water and energy saving set, the effect is good; Float type, electronic timing can choose.The cold wind, big rotor fan air, low noise, long life. Stop frequent rev.
Parts are confined by national gb1501998 "steel pressure vessel" and GB151-1999 "tubular heat exchanger of manufacture, test and check and accept," pressure vessel safety technology supervision code "supervision. Equipment structure design is reasonable, facilitate maintenance; The surface heat spraying, beautiful appearance, not rust; No basis installation, smooth operation no vibration, maintenance rate is low, no consumables, operation cost less, without waiting for continuous operation special.
工程狀況環境與技藝指標 Working condition and technical indexes | |
進氣室溫 The inlet temperature |
室溫型≤50℃,持續高溫型≤80℃ |
閉式冷卻塔策略 Cooling way |
風冷(油冷) |
區域環境熱度 Environment temperature |
≤40℃(風冷) |
各種壓力露點 Pressure dew point |
1.7℃~10℃(0.7 MPa) |
制熱劑 Refrigerants |
R-22或基于雇主符合要求可使用R134a,R404 a,R507等無氟環保型空調制冷劑劑。 |
進氣水壓 The inlet pressure |
0.2~1.0MPa(6.4 MPa下述接納備貨) |
壓力值損失費 The pressure loss |
≤0.02 MPa |
冷卻液水浸水溫 Cooling water inlet water temperature |
≤32℃(油冷) |
一系列循環水系統浸水經濟壓力 Cooling water feed water pressure |
0.15~0.4 MPa(水冷式) |
◆重點方法系統參數 Main technical parameters
ADH |
-5F |
-10F |
-20F |
-30F |
-60F |
-75F |
-120F |
-150F |
-200F |
-250F |
-300F |
-400F | |
解決量 Capacity m3/min |
0.7 |
1.6 |
2.6 |
3.8 |
7.0 |
8.5 |
13.5 |
17 |
23 |
27 |
34 |
45 | |
工作的阻力 Work pressure |
| ||||||||||||
露點環境溫度 Dew point temperature |
| ||||||||||||
致冷劑 Refrigerants |
R-12 |
| |||||||||||
24v電源 Power |
|
| |||||||||||
減少機工率 Compressor power(KW) |
0.18 |
0.28 |
0.6 |
0.75 |
1.1 |
1.3 |
2.2 |
2.9 |
3.7 |
4.8 |
5.5 |
7.5 | |
扇葉三相異步電機公率 Fan motor power(W) |
30 |
170 |
170 |
180 |
300 |
300 |
510 |
510 |
600 |
720 |
900 |
1200 | |
數據接口尺寸規格 Interface size |
ZG1/2" |
ZG1" |
ZG1" |
ZG1.5" |
ZG1.5" |
ZG2" |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL |
DN80FL | |
外貌規格 Appearance and size |
長L(mm) |
530 |
800 |
800 |
800 |
1100 |
1100 |
1550 |
1400 |
1550 |
1800 |
1900 |
2000 |
寬W(mm) |
360 |
450 |
450 |
450 |
600 |
600 |
650 |
780 |
780 |
780 |
950 |
950 | |
高H(mm) |
490 |
970 |
970 |
970 |
1250 |
1250 |
1480 |
1580 |
1580 |
1580 |
1800 |
1800 | |
重量 Weight(kg) |
50 |
95 |
100 |
100 |
210 |
250 |
350 |
470 |
550 |
650 |
800 |
1000 |